Protect Your Pride And Joy With The Ghost Immobiliser  
  
Guard your precious possessions against theft with the ghost immobiliser problems Immobiliser. This system is discreet & doesn't require additional key fobs to operate.  
  
The device utilizes buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin code sequence that can be changed up to 20 times. This will allow your vehicle to begin.  
  
Simple process to change the PIN code  
  
Many homeowners are upgrading their security because of the rise in vehicle theft. There are a variety of aftermarket security devices available including tracking systems, immobilisers and alarms. However they do not all are equally efficient in protecting your vehicle. A tracking system can assist you in locating your vehicle in the event of it being stolen however it cannot stop the crime. Immobilisers, however perform exactly as they state on the tin: they shut off your car's engine so that it can't be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves to steal your vehicle.  
  
By using the buttons that are already present in your car, the ghost device creates a unique sequence which must be entered before the engine will start. This can be accomplished using the indicator stalk windows or heater buttons. In addition it is possible to use an app for mobile devices that acts as an emergency PIN code bypass and allow the driver to operate the car without having to use the button sequence. This feature is particularly beneficial if you have to give your car away for valet parking or maintenance, as the immobiliser will remain active and not deactivated.  
  
The ghost 2 immobiliser review is a very unique and ingenious device that works in conjunction with buttons of your car rather than being a standalone device. It's not just an effective deterrent for vehicle theft however, it can be used on future vehicles you may own. This makes it a more cost-effective option than a traditional wheel lock.  
  
Weatherproof small device  
  
The Autowatch ghost immobiliser problems Immobiliser is an advanced security system that safeguards your car from key cloning and hacking. It also blocks ECU swapping. It is a weatherproof tiny device that communicates directly with your vehicle's ECU via the CAN data bus to shut down the engine. It can be installed in the vehicle without the need for extra wiring, and has been thoroughly tested to make sure it works with all vehicles. It is also resistant to jamming devices which is an approach used frequently by car thieves to circumvent existing immobilisers.  
  
The advantage of CAN data over conventional systems is that they work silently. It isn't detected by sophisticated RF scanning and code-grabbing technology and cannot be detected by traditional diagnostic tools. The Autowatch ghost immobiliser problems doesn't produce LED indications and uses the buttons inside your vehicle, such as the steering wheel, centre console or door panels to create a unique, changeable disarm sequence. This sequence can be extended 20 presses for extra security. The iPhone app is limited to one connection, and comes with the Ghost's unique pairing code. the Ghost. All communication between the two devices is secured.  
  
The Ghost stops car thieves from adding an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. The engine will only start when a valid PIN code has been entered. It can also be put into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) so that you can give your car to a valet service to be serviced without needing to enter a PIN.  
  
Tested for each vehicle  
  
The Autowatch Ghost is the first aftermarket CANbus immobiliser. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device intercepts signals to prevent your car from starting up normally until you enter a specific code. The system can be turned on and off through your smartphone's app without the need for wires.  
  
Standard factory immobilisers for automobiles function through a transponder inside the key that transmits a signal to the ECU. If the correct code is transmitted the car will start however if the transponder is replaced by one from a different vehicle, the immobiliser cannot recognize it. This allows the vehicle start and be stolen. A South African company that is at the forefront of car security systems technology has developed the Ghost immobiliser. It protects your vehicle from key cloning, hacking and even key theft. Only by physically towing your vehicle away could a thief steal it and not be able to drive the vehicle.  
  
Ghost makes use of the buttons on your vehicle, including the indicator stalk, steering wheel and door panels to create a unique, changeable PIN code sequence that must be entered before you can use your car. This is done without the need for extra hardware such as key fobs and can be as long as 20 presses long. It is also unrecognizable by devices for diagnosis and transmits radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to detect that the system has been set up.  
  
Unlike physical anti-theft devices like clamps or wheel locks, Ghost is hidden within the vehicle so it can't be removed or disabled by thieves. It's also harder to remove than a car alarm, which requires disarming using a button sequence. This makes it a great alternative to an GPS tracking device that can be used to track your vehicle after it's stolen.  
  
Emergency PIN code override  
  
You do not have to look far on social media to find stories or videos about cars that have been stolen using the latest technology tools. Key-cloning devices, for instance, and hacking tools that allow them to start the car without the original keys.  
  
The Ghost immobiliser helps combat this and gives you an additional layer of security to stop your vehicle from being stolen in the event of being targeted by thieves. It generates a unique pin code by pressing the buttons on your steering wheel, door panel and the centre console. This unique PIN must be entered in conjunction with your original key fob in order to prevent the vehicle from getting started. The unique override pin is found on a black plastic card which you will receive following the installation. It is easy to remember because there are no LED indicators.  
  
The device is hidden in the vehicle's wiring and doesn't emit radio signals. Therefore, it cannot be detected by diagnostic software which can identify what type of security systems you have installed. This makes it a great alternative to the tracking device.  
  
Contrary to most security systems, which have a relay in the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable a vehicle completely, by sending a digital block to the ECU and engine.  
  
It is also possible to connect a separate analogue immobiliser, alarm or tracker to these systems, but this has to be specified prior to installing the device. They are also service/valet mode compatible and are a great alternative to a tracker you have your car checked for an electrical fault at the dealership.  
  
Service/Valet mode  
  
In recent years there has been an increase in vehicles stolen without the owner's keys. It's easier than ever before to steal your pride and joy with the availability of key cloning tools and door lock picks. To combat this we are now offering the Autowatch Ghost 2 immobiliser immobiliser that prevents your car from being driven even if your keys were cloned or your car has been stolen.  
  
It communicates directly with your car's ECU (Engine Control Unit) via the data loop of CAN. It is completely silent, as it does not use radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also prevents you from introducing a new ECU or key to bypass the system, because only the PIN number allows the engine to start.  
  
The device is hidden within your vehicle and is accessible via buttons on your steering wheel, center console, and door panels. A unique and reversible PIN code sequence up to 20 digits must be entered before you are able to start your vehicle.  
  
This is the first aftermarket CAN-bus immobiliser for the market that has been created. It can prevent your vehicle from being started or driven when you don't enter a PIN number first. If the device is in armed and you try to drive off it will display a warning on your dash that will flash continuously for Ghost Immobiliser Problems about 300m, if you enter your PIN code at this point, it will deactivate the anti-hijack and your car will continue to drive in the normal way. If you do not enter your PIN code at this point, the warning will keep flashing & will require another PIN code for every attempt to start your vehicle.